Configuration Guide

This will set up the basic structure that will be filled in over the coming weeks.

• Getting Started

  • Working with configuration

  • Configuration commands

  • Basic system configuration

  • Configuring CPU affinity

• Interfaces

  • Bonding/LACP

  • Bridging

  • Dataplane

    • VLAN Interfaces

    • IP Unnumbered Interfaces

  • ERSPAN

  • L2TPv3

  • Loopback

  • Point-to-Point Protocol over Ethernet (PPPoE)

  • Switch

  • Tunnelling: GRE (L2 bridging), IPIP (IPIP, IPIP6, IP6IP, SIT), L2TPv3, VXLAN/VTEP

  • Virtual Feature Points (VFP)

  • Virtual Routing and Forwarding (VRFlite)

• Services

  • DHCP: Clientv4/v6, DHCPv4/v6 relay, DHCPv4/v6 server

  • DNS: Host config, Dynamic DNS, DNS forwarding

  • LLDP

  • NAT: NAT44 (SNAT and DNAT), NAT46, NAT64, NPTv6

  • NETCONF

  • Representational State Transfer (REST)

  • Portmonitor

  • SNMPv1/v2/v3 server

  • SSH/Telnet server

  • TWAMP

• System

  • Access Control Management (ACM) and Role-Based Access Control (RBAC)

  • ALGs: ftp, rpc, sip, tftp

  • NTP

  • TACACS+

• Protocols

  • Border Gateway Protocol (BGP)

  • MPLS Label Distribution Protocol (LDP)

  • Open Shortest Path First (OSPF)

  • Open Shortest Path First version 3 (OSPFv3)

  • Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP)

  • static

• Features

  • Firewall

  • Deep Packet Inspection

  • Carrier-Grade NAT (CGNAT)

    • CGNAT and PCP

    • CGNAT and Kafka logging

  • Policy-based routing (PBR)

  • Quality of Service (QoS): Shaping, marking, policing

  • SPAN/RSPAN/ERSPAN

  • VPN: IPsec (interface based/vti), IPsec (policy-based)

  • VRRPv2/v3

  • VLAN

  • 802.1q, QinQ

• Hardware data plane: L2 basic forwarding, L3 basic vlan forwarding, STP, VLAN, 802.1Q