Syntax: clear console
Use this command to clear the screen of the user console.
Syntax: clear interface counters
Use this command to clear the kernel counters for all interfaces of all types, including bridge, data plane, loopback and tunnel.
Syntax: delete session table [ conn-id <connection identifier> | destination <dst-addr[:dst-port]> | nat46 | nat64 | source <src-addr[:src-port]> ]
Use this command to delete all the entries from the dataplane session table.
The optional arguments can be used to delete specific types of session table entries.
Syntax: monitor interfaces
Displays bandwidth utilization statistics for each interface across all interfaces.
Syntax: poweroff [ at <time> | cancel | now ]
Powers off the system. Only users with administrative (admin)-level permission can run this command.
Syntax: reboot[ at <time> | cancel | now ]
Reboots the system. Only users with administrative (admin)-level permission can run this command.
Syntax: reset ip arp address <ipv4>
Removes the entry associated with a specific IP address from the ARP cache.
Syntax: reset ip arp address <interface name>
Removes the entry associated with an Ethernet interface from the ARP cache.
Syntax: show arp [ <interface> ]
Displays the ARP cache of the system.
Syntax: show date [ utc ]
Display the system date and time in either local time or Universal Time Coordinated (UTC).
Syntax: show hardware cpu [ summary ]
View CPU information used in the system.
Syntax: show hardware dmi
View information about the Desktop Management Interface (DMI) of the system. The DMI provides a standard framework for managing resources in the device.
Syntax: show hardware mem
View information about system memory.
Syntax: show hardware pci [ detailed ]
View information about the PCI bus. The PCI bus provides communication among the peripheral components and processor of the system.
Syntax: show history [ <num> | brief ]
Display command history.
brief - displays the most recent 20 commands.
Syntax: show host [ date | domain | lookup [ <hostname> | <ipv4> ] | name | os ]
View information configured for the host.
lookup - shows the canonical name and IP address plus any configured aliases recorded in the name server for the specified host or IP address.
Syntax: show interfaces [ counters | detail | extensive | system [ enabled ] ]
View configuration information and operational status for the interfaces and virtual interfaces.
counters - displays counter information about all the interfaces available on your system
detail - displays detailed information about all the interfaces available on your system.
extensive - displays detailed configuration information and operational status for all interfaces and virtual interfaces.
system - displays all the physical interfaces available on your system.
system enabled - displays only enabled system interfaces known to the system.
Syntax: show reboot
View the next scheduled reboot date and time.
Syntax: show session table [ detail | source <src-addr[:src-port]> | statistics ]
View information on the dataplane session table.
Syntax: show system boot-messages [ all ]
Display a subset of the kernel bootup messages, or all of them if all
is specified.
Syntax: set date [ <datetime> | ntp <ntpserver> ]
Set the system date and time either directly or by specifying an NTP server from which to acquire them.
Syntax: set terminal [ key query-help [ disable | enable ] | length <number> | pager <program> | width <number> ]
Sets the behavior of the system terminal.
key query-help - enables or disables help using the question mark. The default option is enable.
pager - the program to use as the terminal pager. If no pager is specified, the default (less) is used.