Syntax: clear console
Use this command to clear the screen of the user console.
Syntax: clear interface counters
Use this command to clear the kernel counters for all interfaces of all types, including bridge, data plane, loopback and tunnel.
Syntax: delete session table [ conn-id <connection identifier> | destination <dst-addr[:dst-port]> | nat46 | nat64 | source <src-addr[:src-port]> ]
Use this command to delete all the entries from the dataplane session table.
The optional arguments can be used to delete specific types of session table entries.
Syntax: monitor interfaces
Displays bandwidth utilization statistics for each interface across all interfaces.
Syntax: poweroff [ at <time> | cancel | now ]
Powers off the system. Only users with administrative (admin)-level permission can run this command.
Syntax: reboot[ at <time> | cancel | now ]
Reboots the system. Only users with administrative (admin)-level permission can run this command.
Syntax: reset ip arp address <ipv4>
Removes the entry associated with a specific IP address from the ARP cache.
Syntax: reset ip arp address <interface name>
Removes the entry associated with an Ethernet interface from the ARP cache.
Syntax: set date [ <datetime> | ntp <ntpserver> ]
Set the system date and time either directly or by specifying an NTP server from which to acquire them.
Syntax: set terminal [ key query-help [ disable | enable ] | length <number> | pager <program> | width <number> ]
Sets the behavior of the system terminal.
key query-help - enables or disables help using the question mark. The default option is enable.
pager - the program to use as the terminal pager. If no pager is specified, the default (less) is used.